LUJUNTEC LJ179587T01 Cv Axle Front Right 3.5L 3.7L

( Brand: Lujuntec ), ( Manufacturer Part Number: LJ179587T01 ), ( Type: Cv Axle Assembly ), ( Surface Finish: Polished, Rust Protected ), ( Placement On Vehicle: Right ), ( Hardware Included: No ), ( Manufacturer Warranty: Lifetime ), ( Country/region Of Manufacture: United States ), ( Fitment: Verify This Part Fits Your Vehicle Using The Compatibility Chart )

Review LUJUNTEC Cv Axle Ford 3.5l Lincoln 3.7l Front Right fits FLEX FWD MKS 2009–2014

The Lujuntec LJ179587T01 Front Right CV Axle is a high-quality replacement part designed specifically for select Ford and Lincoln vehicles. This CV axle is suitable for the Ford Flex models produced between 2009 and 2013, as well as the Lincoln MKS models from 2009 to 2014, all equipped with the 3.5L engine.

The Lujuntec LJ179587T01 CV axle is crafted with precision and durability in mind, ensuring a reliable performance. It features a robust construction that includes a strong, heat-treated steel shaft, reinforced joints, and high-quality bearings. This combination ensures a smooth and efficient operation, reducing the risk of squeaks, rattles, and vibrations.

The CV axle is also designed to handle the demands of heavy-duty driving, making it an excellent choice for drivers who frequently tow trailers or carry heavy loads. The high-grade materials used in its construction guarantee longevity and resistance to wear and tear, ensuring a reliable and long-lasting performance.

The Lujuntec LJ179587T01 Front Right CV Axle is easy to install, thanks to its straightforward design and clear installation instructions. The axle is compatible with the original equipment manufacturer (OEM) specifications, ensuring a perfect fit and seamless integration with your vehicle's drivetrain.

In conclusion, the Lujuntec LJ179587T01 Front Right CV Axle is an excellent replacement part for your Ford Flex or Lincoln MKS. Its robust construction, high-quality materials, and easy installation make it a reliable and cost-effective solution for maintaining your vehicle's drivetrain.

1. Replacement Part: This is a direct replacement part, which means it's designed to fit your specific vehicle model and year.

2. OEM Equivalent: Although not an original equipment manufacturer (OEM) part, it's an OEM equivalent, which means it's made to the same specifications as the original part, ensuring a good fit and performance.

3. Cost-Effective: Compared to OEM parts, this aftermarket alternative can be more cost-effective, allowing you to save money without sacrificing quality.

4. Availability: Aftermarket parts like this are often more widely available, which means you can usually find them quickly and easily, reducing the wait time for replacement.

1. Warranty: Aftermarket parts often have different warranties than OEM parts, so you might not have the same level of protection if something goes wrong.

2. Quality Concerns: Although this part is an OEM equivalent, some people may have concerns about the overall quality of aftermarket parts compared to OEM parts.

3. Durability: Depending on the manufacturer, the durability of aftermarket parts can vary. Some may not last as long as OEM parts.

If you're looking for a cost-effective and readily available option for replacing the front right CV axle on your 2009-13 Ford Flex 3.5L or 2009-14 Lincoln MKS 3.7L, the Lujuntec LJ179587T01 could be a good choice. Just keep in mind that it may not have the same warranty as OEM parts and that its durability might be slightly less than that of OEM parts.

If you're willing to take the risk and save some money, the Lujuntec LJ179587T01 could be a good choice for you. However, if you value warranty coverage and are concerned about the long-term durability of aftermarket parts, you may want to consider spending a little more on an OEM part. Ultimately, the decision is yours, and you should weigh the pros and cons based on your specific situation and priorities.

Details:

There are some vehicle repairs that should be done by qualified mechanics to prevent any further issues. About Shipping If your CV axles have a sensor ring around the outer joint, handle shaft with care during installation. Tips While Replacing A CV Axle.

Just as you removed the old CV axle, insert new one into same spot in transmission housing. Make sure the brake line is not damaged in process and working fine. Remove the brake caliper. Remove wheels by loosening the lug nuts using a wrench.

Our return process is simple and fast. Pry Bar or CV Axle Puller. Before removing the CV shaft completely, place a drain pan underneath engine where other end of is connected to transmission. After the wheel is attached, you can lower car by removing jack and stands.

Refill the transmission fluid recommended for your vehicle. Tools required: Drain Pan. You can also use a screwdriver to pop the CV joint out and disconnect shaft from hub assembly. You can also refer to the owners manual for right placement of jack.

Remove the hubcap to access axle nut and loosen it using a breaker bar. If the axle doesn come loose, try twisting it back and forcing to break seal. Reattach the tie rod to steering knuckle and rejoin hub with strut. Use a torque wrench to fasten the bolts recommended specifications.

Screwdrivers. A CV boot failure is a bad news for any joint because, if the fails, will lose its lubrication and eventually fail. Fasten the axle nut to specifications mentioned in manual using a torque wrench and replace hub cap. Step 2: Installing The New CV Axle.

Any damage to the sensor ring can cause Anti Lock Braking ABS system get damaged and malfunction. Step 1: Removing The Old CV Axle. Reattach the sway bar if removed earlier, and fasten lug nuts to reattach wheel. The peg will slide in until the axle is flush against housing.

It should have the same compressed length , inner and outer stub length spline count for proper fitment, seal diameters. Check the transmission fluid for discoloration while replacing CV axle shaft. Park your car on a leveled surface, secure the vehicles wheel using chocks, and engage parking brakes. Unbolt the castle nut on outer tie rod and remove it from steering knuckle using a end puller tool.

Remove the CV axle from hub by hitting joint with a drift chisel and hammer. While installing the CV shaft, ensure boots are secured properly and show no signs of visible damage like cracks splits. Use a pry bar to remove the CV axle from engine side. FWD CV Axle Fits Ford Flex 2009 13 3.5L Lincoln MKS 2009 14 3.7L Front Right How To Replace A Shaft.

Replace the CV shaft seal if you see any transmission fluid leaking. Do not remove the lug nuts completely. Its normal for some transmission fluid to leak out as you remove the axle from CV joint. Its advised to replace your transmission fluid and seal if necessary.

Reinstall the brake rotors and calipers. You can also refer to the user manual for specific torque values. New List Item. Use a torque wrench to tighten the nuts and bolts values specified by manufacturer.

Before replacing the old CV axle shaft, check whether new shaft has same specifications or not. Unbolt the hub from strut by loosening bolts that held them together. Hammer or Mallet. Never use a power tool to torque the spindle nut because you can damage and outer CV joint.

Reinsert the other end of axle shaft through hub assembly in same spot where you removed old. Remove the axle nut and brake assembly using a wrench socket. Once these bolts are removed, the hub should only be connected by axle through hole. Place a jack under the car to lift it off ground and install jack stand under vehicle.

Take a lug wrench and loosen the wheels nuts. Detach the brake fluid hose and set it aside safely to keep secure. Tighten the lug nuts and remove wheel chocks to take vehicle for a test drive.

part #: lj179587t01 price

• $95.99

specifications cpartransmissio:

• for models: Fwd, Mks, Flex
• for makes: Ford, Lincoln
• for years: 2009-2014
• brand: Lujuntec
• mpn: Lj179587t01
• type: Cv Axle Assembly
• surface finish: Polished, Rust Protected
• placement on vehicle: Right
• hardware included: No
• manufacturer warranty: Lifetime
• country/region of manufacture: United States
• fitment: Verify This Part Fits Your Vehicle Using The Compatibility Chart

shipping cpartransmissio:

• cost: $0.00
• transit: 4-8 Days
• class: Standard
• service: Standard
• type: Fixed

returns cpartransmissio:

• paid by: Seller
• policy: Returns Accepted
• time: 30 Days

seller cpartransmissio:

• # reviews: 15224
• rating: 99.3%
• city: Ontario, California

payments cpartransmissio:

• other
• credit card: Discover
• wallet: Google-pay

general cpartransmissio:

• Car Truck Parts Accessories > Transmission Drivetrain > CV Joints, Boots Parts
• condition: Remanufactured

offer cpartransmissio:

• sold: 0
• options: Ship-to-home
• quantity: 10
• started: September 30, 2024
• availability: In Stock

Lujuntec LJ179587T01 Is Similar To:

• Lujuntec Lj845461t01 For Chevytrailblazer 02-09 Gmc Envoy Isuzu Front Left And Right Cv Axle Assembly (30.3% similar) Some vehicles have a cotter pin to secure the axle nut. Attach the new axle to hub and begin replacing bolts you removed earlier in process: hub/strut tower. What are the symptoms of a bad cv axle. Any slack or movement in the axle confirms that cv shaft is damaged. Now its time to remove the axle ...(May 19th, 2025)
• Lujuntec Lj845448t01 For Mitsubishi Lancer 2002-2007 Front Left And Right 2x Cv Axle Shaft Assembly (29.6% similar) FAQs about cv axles. Carefully remove the bolts holding brake caliper brackets in place and calipers. Driving over rough terrain where there are rocks and debris can shorten the life of a cv axle, because more opportunities to damage rubber boot that protects moving parts. The most common symptom of...(May 20th, 2025)
• Lujuntec Ljt842467s01 2x Front Left Right Cv Axle Shaft For Dodge Durango 11-22 Jeep Grand Cherokee (35.7% similar) Step 1: removing the old cv axle. Reattach the sway bar if removed earlier, and fasten lug nuts to reattach wheel. Screwdrivers. Its advised to replace your transmission fluid and seal if necessary. Reattach the tie rod to steering knuckle and rejoin hub with strut. About shipping new list item. ...(June 13th, 2025)