1. CV Joints For Sale.
  2. sku: 4630780371905504
  3. GDCARPARTSIN GD845124CAR

GDCARPARTSIN GD845124CAR Front Left Right Cv Axle Shafts B2CVB52 2X 3.5L V6

fits model: Fwd, Sienna. make: Toyota. year: 2011–2016.

Gd845124car Gdcarpartsin 2x Front Left And Right For 2011-2016 Toyota Sienna 3.5l V6 Fwd Cv Axle Shafts

( Brand: Gdcarpartsin ), ( Manufacturer Part Number: GD845124CAR ), ( Placement On Vehicle: Front ), ( Type: Cv Axle Assembly ), ( Manufacturer Warranty: 1 Year ), ( Ipn: B2cvb52 ), ( Position: Front Left Side, Front Right Side ), ( Package: 2x Cv Axle Joint Shaft;pair Cv Axle Joint Shaft ), ( Item Alias Name: Cv Axle Joint Shaft Assembly ), ( Axle Nut Thread Size: M22x1.5 ), ( Inboard Joint Type: Left ), ( Important Note: Please Read Notes To Make Sure This Will Fit Your Vehicle ), ( Years: 2011 2012 2013 2014 2015 2016 ), ( Compressed Length: Inch ), ( Engine: 3.5l V6 Naturally Aspirated ), ( Attention: Please Provide Cars Vin After Place Order We Will Ship It. ), ( Fit Model: Sienna ), ( Fitment Type: Direct Replacement ), ( Drive Type: Fwd ), ( Axle Nut Length: 21 ), ( Axle Nut Socket Size: 33.7 ), ( Axle Nut Type: Bihexagonal )

Review GDCARPARTSIN 2x Front Left And Right Toyota 3.5l V6 Cv Axle Shafts fits SIENNA FWD 2011–2016

Introducing the GDCarParts GD845124CV front left and right CV axle shafts, specifically designed for the Toyota Sienna models from 2011 to 2016 with a 3.5L V6 engine and front-wheel drive. These premium CV axle shafts are an essential upgrade for your vehicle, ensuring optimal performance and longevity.

Manufactured with high-strength steel, these CV axle shafts deliver superior durability, enabling your Toyota Sienna to tackle various road conditions with confident agility. Their robust construction with durable grease seals keeps the inner workings protected from contamination, contributing to your vehicle's efficiency and reliability.

These CV axle shafts come as a set, including one for the left side and one for the right side of your Toyota Sienna. Efficiently replacing both of these components simultaneously reduces the overall installation time, ensuring you spend less time off the road and more time enjoying your vehicle.

Full compatibility with the Toyota Sienna models between 2011 and 2016, featuring a 3.5L V6 engine and front-wheel drive system, guarantees a precise fit, reducing any potential compatibility concerns. Installing these CV axle shafts requires no additional modifications, delivering a hassle-free upgrade for your vehicle.

Professionally engineered and rigorously tested, the GDCarParts GD845124CV front left and right CV axle shafts can help enhance your driving experience by improving the responsiveness of your Toyota Sienna. These upgraded components are made to provide smoother drives and enable a more precise steering feel, enabling you to take on any challenge with confidence.

Choosing the GDCarParts GD845124CV axle shafts for your 2011-2016 Toyota Sienna with a 3.5L V6 engine and front-wheel drive means opting for high-quality, long-lasting parts that meet and exceed original equipment manufacturer specifications. Incorporating cutting-edge engineering and materials, this set of CV axle shafts optimizes the performance of your Toyota Sienna, helping you enjoy worry-free drives, mile after mile.

Pros and Cons of Buying GDCarParts GD845124 Car CV Axle Shafts for 2011-2016 Toyota Sienna 3.5L V6 FWD

Introduction:

When it comes to replacing CV axle shafts on your 2011-2016 Toyota Sienna with a 3.5L V6 engine and front-wheel drive, there are various aftermarket options available. One of these options is the GDCarParts GD845124 CV axle shafts. In this analysis, we will discuss the pros and cons of purchasing these particular CV axle shafts for your vehicle.

Pros:

1. Lower price compared to OEM: GDCarParts GD845124 CV axle shafts are priced significantly lower than their original equipment manufacturer (OEM) counterparts. This can provide a cost-effective solution for repairing your Toyota Sienna without incurring the steep expense of OEM parts.

2. Availability: As aftermarket parts, GDCarParts CV axle shafts are commonly available at a variety of auto parts stores and online retailers. This can lead to quicker turnaround times compared to waiting for an OEM part to be ordered and shipped.

3. Functionality: GDCarParts GD845124 CV axle shafts are designed to provide proper function and durability. They are engineered to match the specifications of the OEM parts and are tested to ensure they fit and work correctly.

Cons:

1. Lack of Warranty: One potential downside to purchasing aftermarket parts like GDCarParts GD845124 CV axle shafts is the lack of a manufacturer's warranty. If there is any issue with the part, you may be responsible for covering the cost of replacement or repair.

2. Inferior Materials: While GDCarParts takes steps to ensure the quality of their CV axle shafts, some customers have reported instances of sub-par materials or workmanship. This could potentially lead to premature failure or a need for replacement.

3. Potential Compatibility Issues: There have been isolated reports of compatibility issues with these aftermarket CV axle shafts on certain variants of the Toyota Sienna. To minimize this risk, make sure to double-check the compatibility of the GD845124 part number with your specific car model and year before purchasing.

Conclusion:

Based on the provided information, purchasing GDCarParts GD845124 CV axle shafts for your 2011-2016 Toyota Sienna 3.5L V6 FWD offers both advantages and disadvantages.The primary benefits include lower price, ease of availability, and comparable functionality to the OEM parts. However, the absence of a warranty, potential inferior materials, and possible compatibility concerns serve as drawbacks.

Recommendation:

If a lower price is a priority and time isn't a concern, purchasing GDCarParts GD845124 CV axle shafts could provide a reasonable solution for repairing your Toyota Sienna. I would recommend checking multiple retailers for the best price and ensuring compatibility before making the purchase. Additionally, if having a warranty is essential to you, it might be worth exploring OEM or other aftermarket parts with extended warranties to mitigate the risk of potential issues.

Details:

Attach the new axle to hub and begin replacing bolts you removed earlier in process: Hub/strut tower. The most common symptom of a bad CV joint is knocking and screeching noise while turning. Knocking Noise. Driving over rough terrain where there are rocks and debris can shorten the life of a CV axle, because more opportunities to damage rubber boot that protects moving parts.

Locate the axle nut. If you don't have one, get the nut as tight can without yanking on it while its up stands. Excessive movement from a damaged axle can wear components inside the transmission more quickly than they would normally. However, such a sound also arises due to the bad ball joint and worn-out tie rods.

New List Item. Do not ignore a bad CV axle. Carefully remove the bolts holding brake caliper brackets in place and calipers. You can spray it with lubricant if its rusted or stuck.

You'll need to keep the nut from turning while unbolting hub. FAQs About CV Axles. The more you speed up, the intense vibrations will become. Replace the axle nut.

CV axles are common in front-wheel-drive vehicles, all-wheel-drive and some rear-wheel-drive vehicles that use independent suspensions. If you notice grease under your car or on tires, it could be because of a bad CV joint. If this is the case, your safety bet to do step before jacking car up. Fit model : Sienna, fit car: Toyota, Fitment type: Direct Replacement, Drive Type: FWD, Outboard Spline Quantity: Left:30;Right:30, Inboard: Left:24;Right:24, Axle Nut length : 21, Socket Size: 33.7,: Bihexagonal.

The noise may also be present while accelerating, but its most noticeable when turning the steering wheel. The louder the noise, more is risk of total breakage. Instead of dropping the caliper to dangle on brake line, use a carbine or other small hook support and keep pressure off line. Replacing The CV Axle.

In some cases, this step may require quite a bit of effort. Any slack or movement in the axle confirms that CV shaft is damaged. This is a sign of bad CV axle, which can lead to excessive vibrations, making it difficult control the vehicle. Get your CV joints checked for damage.

Tie Rod/steering knuckle. It the boot has been damaged for a long time, your CV joints might be faulty and need to checked. If theres another pin here, you'll again need to use pliers straighten it out. If your ball joints are falling, get them checked and replaced.

Loosed the bolts holding outer tie rod to steering knuckle. In worse cases, the vehicle starts to bounce, and in such a condition; it is advised not drive your. This is where the optional impact wrench will come in handy. Steering Vibrations.

This usually happens due to the lack of lubrication inside CV joint or when is on verge failure. You might see transmission fluid or have some leak while prying the axle. If you suspect your axle shaft is the culprit, go under vehicle and try to push up down side. You can use your mallet or a hammer wrapped in towel to carefully coax the axle into position.

In some cases, the rubber just dries out and cracks, which has same effect. The function of an axle is to connect the transmission gears wheels and transfer power from engine your vehicle. Package Service 4. The vibrations you re feeling and noise hearing are a warning that its time for maintenance.

Now its time to remove the axle nut. Insert the new axle into transmission where old one was removed. Remove the bolts holding hub to strut tower. Look further down the axle to see where it meets transmission.

Make sure the vehicle is in Park or that it gear with parking brake set. Another sign of a bad or failing CV joint is wobbly wheel, especially when you press the gas pedal. A worn or damaged CV joint will vibrate while you re driving. Use your pry bar to the axle from CV joint.

Fast shipping:All our packages use USPS First Class/UPS/FedEx. What Are The Symptoms Of A Bad CV Axle. Some vehicles have a cotter pin to secure the axle nut. CV joints in this condition will not be able to balance properly during rotation.

You'll need to remove it using pliers straighten the pin so can be pulled out. The same goes for driving in snowy or icy conditions, where salt and sand can also damage the rubber. You should be able to remove the axle at this point. Damaged CV joint boots lead to grease leakage and allow the joints sustain further damage.

Pair CV Axle Joint Shaft Assembly for 2011 - 2016 Toyota Sienna 3.5L V6 Front FWD, What Is. Replace the wheel and lower vehicle.

specifications cpartransmissio:

  • for models: Fwd, Sienna
  • for makes: Toyota
  • for years: 2011-2016
  • brand: Gdcarpartsin
  • mpn: Gd845124car
  • placement on vehicle: Front
  • type: Cv Axle Assembly
  • manufacturer warranty: 1 Year
  • ipn: B2cvb52
  • position: Front Left Side, Front Right Side
  • package: 2x Cv Axle Joint Shaft;pair Cv Axle Joint Shaft
  • item alias name: Cv Axle Joint Shaft Assembly
  • axle nut thread size: M22x1.5
  • inboard joint type: Left
  • important note: Please Read Notes To Make Sure This Will Fit Your Vehicle
  • years: 2011 2012 2013 2014 2015 2016
  • compressed length: Inch
  • engine: 3.5l V6 Naturally Aspirated
  • attention: Please Provide Cars Vin After Place Order We Will Ship It.
  • fit model: Sienna
  • fitment type: Direct Replacement
  • drive type: Fwd
  • axle nut length: 21
  • axle nut socket size: 33.7
  • axle nut type: Bihexagonal

offer cpartransmissio:

  • options: Ship-to-home
  • quantity: 10
  • started: January 29, 2025
  • sold: 0
  • best offers: True
  • availability: In Stock

returns cpartransmissio:

  • time: 30 Days
  • policy: Returns Accepted
  • paid by: Seller

shipping cpartransmissio:

  • type: Fixed
  • class: Standard
  • service: Standard
  • cost: $0.00
  • transit: 3-8 Days

general cpartransmissio:

  • condition: New
  • Car Truck Parts Accessories > Transmission Drivetrain > CV Joints, Boots Parts

seller cpartransmissio:

  • # reviews: 10590
  • rating: 99.2%
  • city: Ontario, California

payments cpartransmissio:

  • credit card: Discover
  • other
  • wallet: Google-pay
for models: fwd, sienna, for makes: toyota, for years: 2011-2016, placement on vehicle: front, type: cv axle assembly, manufacturer warranty: 1 year, position: front left side, front right side, package: 2x cv axle joint shaft;pair cv axle joint shaft, item alias name: cv axle joint shaft assembly, axle nut thread size: m22x1.5, inboard joint type: left, important note: please read notes to make sure this will fit your vehicle, years: 2011 2012 2013 2014 2015 2016, compressed length: inch, engine: 3.5l v6 naturally aspirated, attention: please provide cars vin after place order we will ship it., fit model: sienna, fitment type: direct replacement, drive type: fwd, axle nut length: 21, axle nut socket size: 33.7, axle nut type: bihexagonal,
category: auto parts > car truck parts accessories > transmission drivetrain > cv joints, boots parts, sku: 4630780371905504,
Gdcarpartsin GD845124CAR Is Similar To:

Copyright © cpartransmissio.com