A1 CARDONE 66-7023 Cv Axle 66-79 912

( Brand: A1 Cardone ), ( Manufacturer Part Number: 66-7023 ), ( Type: Cv Axle Assembly ), ( Country/region Of Manufacture: China ), ( Item Length: 29.500 )

Review A1 CARDONE New Cv Axle Assembly 66-79 Porsche Volkswagen 912 fits BEETLE

A1 Cardone 66-7023 CV Axle - Perfect Replacement for 1966-1979 Porsche and Volkswagen 912 Beetle

The A1 Cardone 66-7023 CV Axle is an exceptional replacement part designed specifically for the 1966-1979 Porsche and Volkswagen 912 Beetle models. This CV axle, manufactured by the renowned automotive parts supplier Cardone, is engineered to deliver superior performance and enduring reliability.

The A1 Cardone 66-7023 CV Axle is a reinforced design, made with high-quality materials to ensure a precise fit and smooth operation. It features a durable CV joint that is engineered to withstand the rigors of daily driving, providing excellent flexibility and eliminating unwanted vibrations.

The CV axle is also designed with a robust CV boot to protect the joint from contaminants and keep it lubricated. The boot is made from a heavy-duty rubber material, ensuring it can withstand the test of time. Additionally, the boot comes with a protective clip to prevent it from coming off during operation.

The A1 Cardone 66-7023 CV Axle is easy to install, making it a popular choice among mechanics and DIY enthusiasts. It comes with all necessary hardware and detailed installation instructions to make the replacement process as hassle-free as possible.

Cardone is known for its commitment to quality and reliability, and the A1 Cardone 66-7023 CV Axle is no exception. It undergoes rigorous testing at the company's state-of-the-art laboratory to ensure it meets or exceeds OE specifications. This means you can trust that this CV axle will perform as well as, if not better than, the original equipment that came with your vehicle.

In conclusion, the A1 Cardone 66-7023 CV Axle is an excellent choice for anyone in need of a replacement CV axle for their 1966-1979 Porsche or Volkswagen 912 Beetle. Its high-quality design, durable construction, and reliable performance make it a top pick among mechanics and enthusiasts alike.

Buying a new A1 Cardone CV axle (part number 66-7023) for a 1966-1979 Porsche/Volkswagen 912 Beetle comes with several pros and cons that you may want to consider before making your purchase.

1. OE-style design: This CV axle is an original equipment (OE) replacement, which means it is designed to match the specifications and dimensions of the original part.

2. High-quality materials: A1 Cardone is a reputable brand known for producing high-quality automotive parts. This CV axle is likely made from durable materials that can withstand the rigors of regular use.

3. Warranty coverage: A1 Cardone offers a warranty on their products, which can provide peace of mind and protect against defects or failure.

4. Improved performance: A new CV axle can help improve the handling and performance of your 912 Beetle by ensuring that the power is being efficiently transferred to the wheels.

1. Cost: Replacing a single CV axle can be an expensive repair, especially when using a high-quality aftermarket part like A1 Cardone.

2. Installation difficulty: Installing a new CV axle can be a complex and time-consuming process, especially if you're not mechanically inclined. It may be worth considering paying a professional to do the installation for you.

3. Potential for additional repairs: Replacing a CV axle can be an indication of other potential issues with your 912 Beetle's suspension or drivetrain. It's important to have these systems inspected and addressed if necessary to prevent further damage or expense.

The decision to buy a new A1 Cardone CV axle for your 1966-1979 Porsche/Volkswagen 912 Beetle ultimately depends on your individual circumstances and priorities. If you value high-quality replacement parts, are willing to pay for the cost, and are prepared for the installation process, then this may be the best option for you. However, if cost is a major concern or you're not confident in your mechanical abilities, you may want to consider alternative options such as used or remanufactured CV axles or having the existing axle repaired if possible. Ultimately, it's important to weigh the pros and cons carefully and make an informed decision based on your specific situation.

Details:

ALWAYS remove and install one CV drive axle at a time. Cardone extensive experience in testing and engineering CV Drive Axles is the foundation behind our proprietary method of a product that meets even exceed.E. All accessories hardware. FAQs:The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly.

Why?, FAQs:I removed both CV drive axles at the same time and now I am having problems reinstalling them. Always use a torque wrench and the nut to manufactures specifications. FAQs:The old CV Drive Axle has a locking prevailing torque nut.- Should I reuse it?, trans axle gear alignment been lost. Placing an order outside the US is easy.

Whats the best way to remove it?, FAQs:The most likely cause is a broken bearing cage due excessive torque load.- This typically an outboard joint problem. A prevailing torque lock nut should never be reused. FAQs:Are the CV Drive Axle shafts balanced at factory?, FAQs:Can I let Axles hang while am working on car?, FAQs:I hear a grinding noise from front end driving and see grease chassis suspension.

FAQs:The most likely cause is the drive train shifting in chassis due to a broken engine mount or hardware, causing misalignment of CV axle and inner joint bind hang up. Always discard the old nut and install a new one. FAQs:Shafts are inspected 100% for run out to prevent vibrations.- Only shafts that meet the specifications utilized in re manufacturing of a CV Drive Axle assembly. FAQs:The most likely problem is the outer CV drive axle boot has ruptured, causing grease to leak out, allowing contamination water and dirt enter damage joint.

It will damage the unit and possibly do to hub bearing assembly. Whats the problem?, FAQs:When I cut wheel hard and step on gas, hear loud ING snapping. NEVER strike the outer joint stub shaft with a hammer. Their global team supports a full spectrum of products and services for diverse customer base, including.E.

Designs, at a fraction of the cost. We build it better. Whats making that noise?, FAQs:When I replace the CV drive axles, should reuse old seals?, step on gas, hear a loud thump and feel bad vibration. Whats wrong?, FAQs:When replacing CV Drive Axle assemblies, always install new trans axle seals to avoid leaking.

FAQs:When the replacement drive axle was installed, sensor ring, sensor, or wiring on near damaged, causing an erratic speed signal to ABS module and setting light. For five decades strong, they built new and remanufactured vehicle parts that meet or exceed.E. FAQs:Never use an impact wrench to install the retaining nut on CV Drive Axle. This can lead to axle separation and damage the inner joint.

What can I do?, FAQs:Is it OK to use an impact hammer install the retaining nut?, FAQs:Never allow CV Drive Axles hang unsupported. FAQs:The wheels wobble when I make a turn. Features and Benefits:A new axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that original worn or stripped, Benefits:Boot clamps are pneumatically crimped, creating perfect seal between boot housing, Benefits:CV Drive Axle measurements validated after assembly ensure proper fit, part numbers antic suffix severe-duty applications include thermoplastic outboard increased life durability versus traditional neoprene. SPECIFICATIONS: ABS Ring Included:Yes, Compressed length in: 1 457, E-Waste:No, FAQs:Always use the proper press type tool to remove old stub shaft.

Form, fit and function,: Splines are precision rolled to ensure proper of CV Drive Axle into the mating hub transmission, which eliminates installation hassles, Benefits:Threads when axle nut is installed, Benefits:Transmission seal diameter precision-machined after heat treatment correct surface finish, promoting long life, Input Shaft Bolt Count:6, Connection Style:Bolt-On, Output Style:Flanges, Package Contents:Complete Axle, Instruction Sheet, Product condition: New, Spindle Nut Included:Yes. What is causing this?, FAQs:I installed a replacement CV drive axle and now my ABS light on won't go out. FAQs:The most likely cause is a defective or worn outer CV drive axle joint. Original packaging.

A1 Cardone 66-7023 New CV Axle Assembly For 66-79 Porsche Volkswagen 912 Beetle.

part #: 667023 prices

• $87.98-$179.96

specifications cpartransmissio:

• for models: Beetle
• for makes: Porsche, Volkswagen
• brand: A1 Cardone
• mpn: 66-7023
• type: Cv Axle Assembly
• country/region of manufacture: China
• item length: 29.500

general cpartransmissio:

• condition: New
• Car Truck Parts Accessories > Transmission Drivetrain > CV Joints, Boots Parts

seller cpartransmissio:

• city: Miami, Florida
• rating: 98.7%
• # reviews: 114192

returns cpartransmissio:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

shipping cpartransmissio:

• type: Fixed
• class: Standard
• transit: 2-6 Days
• cost: $0.00
• service: Standard

payments cpartransmissio:

• other
• wallet: Apple-pay
• credit card: Diners-club

offer cpartransmissio:

• availability: In Stock
• sold: 0
• quantity: 1
• options: Ship-to-home
• started: July 29, 2025

A1 Cardone 66-7023 Is Similar To:

• Cardone Industries 082617476423 New A1 60-2036 Cv Axle Shaft (38.3% similar) ...(July 30th, 2024)
• Cardone Industries 60-1136 New A1 Cv Axle Shaft (42.2% similar) Part #: Cardone industries 60-1136 for sale...(July 30th, 2024)
• Cardone Industries 60-1323 New A1 Cv Axle Shaft (43.8% similar) Part #: Cardone industries 60-1323 for sale...(August 1st, 2024)
• Cardone Industries 082617479394 New A1 60-2012 Cv Axle Shaft (38.3% similar) ...(August 1st, 2024)
• Cardone Industries 60-8171 New A1 Cv Axle Shaft (40.6% similar) Part #: Cardone industries 60-8171 for sale...(August 1st, 2024)
• Cardone Industries 60-1172 New A1 Cv Axle Shaft (42.2% similar) Part #: Cardone industries 60-1172 for sale...(August 1st, 2024)
• Cardone Industries 082617484015 New A1 60-2084 Cv Axle Shaft (36.9% similar) ...(August 1st, 2024)
• Cardone Industries 60-8113 New A1 Cv Axle Shaft (42.2% similar) Part #: Cardone industries 60-8113 for sale...(August 1st, 2024)
• A1 Cardone 60-9275 Cv Axle Assembly For 02-08 Mini Cooper (57.4% similar) Axle nut locking type: stake. Specifications: abs ring included: no. Cv drive axle is measured after assembly to ensure proper fit. Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing. Threads are precision rolled to ensure proper fit when axle nut is ...(August 6th, 2024)
• A1 Cardone 60-1319 Cv Axle Assembly For 94-96 Blazer Jimmy S10 Sonoma (56.8% similar) Do I have to be there sign for my package. Our re manufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%. All accessories hardware. Cv drive axle is measured after assembly to ensure proper fit. Boot clamps are pneumatically crimped, ...(August 27th, 2024)
• A1 Cardone 60-5244 Cv Axle Assembly For 02-04 Toyota Camry (56.9% similar) Always use a torque wrench and the nut to manufactures specifications. Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing. It will damage the unit and possibly do to hub bearing assembly. Cv drive axle is measured after assembly to ensure proper fit. Features...(August 29th, 2024)