fits model: Tundra. make: Toyota. year: 2010.

( Manufacturer Part Number: 423110C020 ), ( Part Type: Cv Axle Shaft ), ( Conditions Options: Rh, Rear, W-backing Plate ), ( Genuine Oem: Yes ), ( Ipn: 447-50571 ), ( Descriptionpartcondition: Rh Passenger Side, Rear, W-backing Plate ), ( Manufacturer Warranty: 6 Month )
The Toyota 423110C020 Rear Axle/CV CV Shaft is an essential component for the 2010 Toyota Tundra, specifically designed to ensure smooth and reliable vehicle operation. This rear axle/CV CV Shaft is a critical part of the vehicle's drivetrain, responsible for transmitting power from the transmission to the wheels.
The Toyota 423110C020 is a high-quality component, engineered to meet Toyota's stringent standards for durability and performance. It features a robust design, with a strong steel construction that can withstand the rigors of daily use. The shaft is equipped with CV joints at both ends, which allow for smooth and flexible motion, even as the vehicle turns corners.
The Toyota 423110C020 Rear Axle/CV CV Shaft is precisely engineered to fit perfectly in your 2010 Tundra. It includes all necessary mounting hardware, making installation a straightforward process for most DIY enthusiasts. However, if you prefer professional installation, a qualified mechanic can easily install this component for you.
In the event of a failure, the Toyota 423110C020 Rear Axle/CV CV Shaft can cause a noticeable vibration or noise while driving. This can be a sign of wear or damage, and it's essential to replace the component as soon as possible to avoid further damage to other parts of the drivetrain.
In conclusion, the Toyota 423110C020 Rear Axle/CV CV Shaft is a crucial component for your 2010 Tundra. Its robust design, precision fit, and easy installation make it an excellent choice for maintaining your vehicle's performance and reliability.
Pros of buying Toyota 423110c020 Rear Axle/CV CV Shaft for 2010 Tundra:1. OEM Part: This is an original equipment manufacturer (OEM) part, ensuring it meets Toyota's quality and performance standards.
2. Fit and Function: As a direct replacement, it should fit perfectly into your 2010 Tundra and work seamlessly with the existing drivetrain components.
3. Warranty: Depending on the seller and the part's condition, you may benefit from a warranty, providing peace of mind and protection against defects.
Cons of buying Toyota 423110c020 Rear Axle/CV CV Shaft for 2010 Tundra:1. Cost: OEM parts like this one can be more expensive than aftermarket alternatives.
2. Availability: Depending on your location and the seller, availability and shipping times may be a concern.
3. Installation: Although a direct replacement, the installation process may require specialized tools and technical knowledge.
Conclusion:If you value original equipment quality and performance, and are concerned about fit and function, the Toyota 423110c020 Rear Axle/CV CV Shaft for your 2010 Tundra is a good option. However, consider weighing the cost and potential installation challenges against the benefits. If you're open to aftermarket alternatives, researching and comparing their specifications could result in a more affordable solution. Ultimately, your decision should be based on factors such as your budget, time, and mechanic's expertise.
Slides are not covered under warranty. Fuel Pump: Includes sending unit and any molded hoses that are non-removable. If noted as assembly, it will include the lug wrench. Column Switch: Includes wiring if applicable up to the first point it can be unplugged.
It may have minor scratches and clear coat peeling. Not included: Throttle body, Turbo, wiring harness exhaust manifold may be left on in certain cases. Power Steering Pump: Includes pulley and ATTACHED reservoir. Transfer Case: Does not include electric shift motor.
Whats Included. Remote reservoirs and brackets will not be included. It is in average condition for the year and mileage of donor vehicle. Wiper Motor: Does not include arms or transmission unless noted.
In the event of a claim, AAA will offer replacement part similar quality. Claims that result from the failure of other components. Ignition Coil s: See part notes. It will have high miles or minor damage.
B parts have average miles and condition for its age. Starter: Includes solenoid. Coolant Overflow Bottle: Cap is included.
New fluids, filters, seal, and gaskets must be used in the installation of driveling component. Many newer transmissions require a relearn/programming procedure. These parts are not covered under warranty: Intake manifold, fuel injectors, oil pan, sensors, water pump. Please see the fitment section below to make sure this will fit your vehicle.
Axle/CV shaft: Does not include the axle nut. Parts installed in vehicles used for commercial, racing, or off-road purposes, parts any purpose other than the original application. Washer Reservoir/Bottle: Includes cap unless noted. Fuel injectors: See our part notes.
Does not include bulbs. Transmission: Automatic transmissions include torque converters and sensors. B Condition, B-COND This wheel will have some cosmetic imperfections. These wheels are still guaranteed to be straight and true, just not the best looking.
Fuel Filler Door: Includes hinge. Control Arm: Includes the ball joint and any bushings. C Condition, C-COND This wheel will have very noticeable cosmetic issues. Interior Rear View Mirror: Does not included bracket glued to windshield.
Spindle/Knuckle: Does not include hub unless noted. Cowl Vent Panel: See Our Part notes, often sold as one side only. Here are our part notes about this specific. Wiper Transmission: Does not include motor or arms unless noted.
Most of the time we include paint code in our part notes. Mass Airflow Sensor: Does not include housing unless pictured. Does not include window/lock switches.
Any brackets are not included. A parts have less than 60,000 miles OR 15,000 per year. Claims that result from accident, abuse, neglect, alteration, improper maintenance, or installation. All lubricants and fluids used must be of the type recommended by manufacturer receipts for installation items accompany claim warranty.
The fitment information can be confusing if you don't buy replacement parts everyday. Does not include bolts/hardware. Rack and Pinion: Includes tie rods but they are not covered under warranty. This for a USED OEM Axle/Cv C/V Shaft Assembly pulled from 2010 TUNDRA with 167000 actual miles on it.
All claims for warranty must be made within this time. Strut: Struts are left assembled and include top plate, spring, dust boot dust boots on used struts rarely in perfect shape. Differential Carrier: Does not include axles. A/C Condenser: Sensors and hoses are not included.
Door Trim Panel: Includes handle and armrest. Our Part #: 447-50571, 3813173. Power Steering Gear: Includes Pittman arm. Wheel/Rim: Does not include cap, tire, or lug nuts.
Blower Motor: Include the squirrel cage/fan blade. Manual transmissions do not include any part of the clutch system. Stabilizer Bar: Does not include links or bushings. This is on a case by basis.
Pay special attention to any options listed. Radio: Pay special attention to our fitment. Jack: See part notes. Caliper: Includes the bracket and slides.
Temperature Control: Includes all knobs, buttons, and sliders. If you don't know what a paint code is or where yours located, please feel free to ask. Is this the right part?, This is most common question that we get. Alternator: Includes the pulley.
Window Regulator: Does not include motor unless noted most are with. Fan Assembly: Includes motors, shroud, and blades. Exhaust Manifold: Does not include turbo where applicable. This is still a fairly nice looking, used wheel.
Sun visor: Does not include clip. A/C Compressor: Includes the clutch/pulley assembly. HID headlights include the bulbs and ballast. 6 MONTH WARRANTY.
Hub: Includes wheel studs. Claims that result from overheating due to cooling system failure.